Custom Aprilia Motorcycle Wheels — From RSV4 to SR Max
Aprilia owners care about how a bike turns in, and wheels are where rotating mass is won or lost. FLEXIMOTO builds custom forged wheelsets for the RSV4 and Tuono V4, the RS 660 and Tuono 660, and the SR Max 250 scooter — fitment engineered per model and confirmed on a 3D drawing before production, with complete inquiries quoted within 48 working hours.
Which Aprilia Models Do We Build Wheels For?
These are the Aprilia platforms we build for most. Find yours below, then send your model and year for a fitment-confirmed quote.
| Model Family | Models | Reference Sizes (Front / Rear) | Typical Build Direction | Suggested Construction |
|---|---|---|---|---|
| V4 Superbike | RSV4 / RSV4 Factory, Tuono V4 | 17 × 3.5 / 17 × 6.0 | Track and fast-road builds chasing rotating mass | Forged |
| 660 Middleweight | RS 660, Tuono 660 | 17 × 3.5 / 17 × 5.5 | Light, agile road and trackday builds | Forged |
| Sport Scooter | SR Max 250 | 15 × 3.0 / 14 × 3.5 | Premium scooter customs and dealer programs | Forged, or cast at volume |
Model or year not listed? Send it with photos of your current wheels — we'll confirm whether reliable fitment data is available before quoting.
What Gets Confirmed on an Aprilia Fitment?
Six items are engineered and locked at the 3D drawing stage for your exact model:
Axle & hub interface
Axle diameters, bearing seats and hub geometry specified per model and year — an RSV4 and an SR Max share nothing but the badge.
Cush drive & sprocket carrier
Chain-driven Aprilias get the rear hub built around the model's cush drive and sprocket carrier, preserving driveline damping as designed.
Rotor mounting
Bolt pattern and offset matched to your calipers — dual-disc RSV4, Tuono and RS 660 fronts included.
ABS sensor provision
Sensor ring accommodation built into the spec so ABS and traction systems keep reading correctly.
Rear width by platform
The V4 bikes run a 6.0-inch rear, the 660s a 5.5-inch rear. We build to your platform's width so your tyre choice stays as intended.
SR Max scooter interface
The SR Max 250 uses its own hub and final-drive arrangement — specified per model, exactly like any motorcycle project.
Aprilia Wheelsets Already on the Road
Each set below carries a quote reference. Send it with your model and year to order the same design and finish, or use it as the starting point for your own.
Want to see every Aprilia build?
Our Aprilia gallery shows more delivered wheelsets than fit on this page — real workshop photos grouped by model, design and finish, each with a quote reference and reference sizes. Ask for the PDF and we'll send it with your quote.
Prefer email? Ask through the quote form and mention "Aprilia gallery" in your message.
More delivered work across brands: documented customer orders.
Match the Construction to the Build
Forged 6061-T6 Aluminum
For RSV4, Tuono and RS 660 builds — the best strength-to-weight in the range, with custom spoke designs and deep finishes.
About Forged Wheels →Scooter & volume programs
Running an SR Max dealer program? Cast A356.1 wheels deliver batch consistency at the best unit economics. A new design needs a mold — allow about 2 months for mold development and sample approval.
Full private-label wheel lines run through our OEM & ODM Service, with an NDA available for program designs.
How Fitment Is Guaranteed
One RSV4 track set or an SR Max dealer program — the process is identical:
1. Send your model and year plus target sizes, tires and finish direction — or a quote reference from our gallery. 2. 3D drawing — every interface engineered for your bike and shown for your sign-off. 3. Production to the approved drawing — typically 25–30 days after approval. 4. Inspection — finished wheels are checked against the approved drawing and photographed for your approval before release. 5. Export packing and customs — export clearance in China and import clearance in your country handled for you. 6. Tracked shipping to your destination.
The risk sits with the process, not with you
Nothing is produced until you approve the 3D drawing. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty, single sets are welcome before volume, and an NDA is available for program designs. Payment by T/T; PayPal accepted on sample orders (handling fee applies). See documented customer orders.
Aprilia Wheels — Frequently Asked Questions
Which Aprilia models can you build wheels for?
We build for the most popular Aprilia platforms — the RSV4 and Tuono V4, the RS 660 and Tuono 660, and the SR Max 250 scooter. Fitment for your exact model and year is confirmed on a 3D drawing you approve before production.
What wheel sizes do you build for the RSV4 and RS 660?
Our reference sizes are 17 × 3.5 front and 17 × 6.0 rear for the RSV4 and Tuono V4, and 17 × 3.5 front and 17 × 5.5 rear for the RS 660 and Tuono 660. The SR Max 250 runs 15 × 3.0 front and 14 × 3.5 rear. Sizes are confirmed for your bike on the 3D drawing.
Will custom wheels work with my Aprilia's cush drive and ABS?
Yes. On chain-driven models the rear hub is specified around the cush drive and sprocket carrier, and ABS sensor ring provision is built into the wheel specification — both confirmed on the 3D drawing you approve before production.
Can I order a design from your Aprilia gallery?
Yes. Every wheel set in our Aprilia gallery carries a quote reference, for example AP-RSV4-B3. Send the reference with your model and year and we quote the same design and finish, or use it as the starting point for your own specification. Ask for the gallery PDF on WhatsApp or through the quote form.
What is the minimum order, lead time and warranty?
One set is the minimum, and dealer volume is supported. Production typically takes 25–30 days after you approve the final 3D drawing, confirmed per project; quotes are sent within 48 working hours once your details are complete. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty; damage from accidents, improper installation, misuse or modification is excluded. If your market requires certification such as JWL or DOT, state it in your quote request and we will confirm what is available for your project.
Spec a Wheelset for Your Aprilia
Send your model and year, wheel type, sizes, finish, quantity and destination — or a quote reference from our gallery. A fitment-confirmed quote comes back within 48 working hours.
FLEXIMOTO · Shapingba District, Chongqing, China · +86 23 6521 0107 · jackie.wei@fleximotoracing.com
Aprilia and all model names are trademarks of their respective owner. FLEXIMOTO is an independent supplier and is not affiliated with or endorsed by Aprilia or Piaggio & C. S.p.A.; names are used solely for fitment identification.