Custom Suzuki Motorcycle Wheels — Hayabusa, GSX-R and Burgman
From the Hayabusa and GSX-R, where wheels carry big power and track loads, to the Burgman 650 maxi-scooter, FLEXIMOTO supplies custom wheelsets for Suzuki — with fitment engineered per model and confirmed on a 3D drawing before production, and complete inquiries quoted within 48 working hours.
Which Suzuki Models Do We Build Wheels For?
These are the Suzuki models we build for, with the standard front and rear sizes we build for each. Find yours, then send your model and year for a fitment-confirmed quote.
| Segment | Model | Front | Rear |
|---|---|---|---|
| Hayabusa | GSX1300R Hayabusa G2 (2008–2020) | 17×3.5 | 17×6.0 |
| Hayabusa | GSX1300R Hayabusa G3 (2021–) | 17×3.5 | 17×6.0 |
| Supersport | GSX-R1000R (2017–) | 17×3.5 | 17×6.0 |
| Supersport | GSX-R750 | 17×3.5 | 17×5.5 |
| Maxi-scooter | Burgman 650 | 17×3.5 | 17×4.5 |
Model or year not listed? Send it with photos of your current wheels — we'll confirm whether reliable fitment data is available before quoting.
What Gets Confirmed on a Suzuki Fitment?
Six items are engineered and locked at the 3D drawing stage for your exact model:
Axle & hub interface
Axle diameters, bearing seats and hub geometry specified per model, year and generation — Hayabusa G2 and G3 are specified separately, so nothing is assumed.
Cush drive & chain line
Rear hubs built around your model's cush drive and sprocket carrier, with chain line verified for your model.
Generation & year
Hayabusa generation and GSX-R1000R model year are confirmed before the drawing starts, because hub, rotor and sensor details change between them.
Rotor mounting
Bolt pattern and offset matched to your calipers — dual-disc Hayabusa and GSX-R fronts included.
ABS sensor provision
Sensor ring accommodation built into the spec so factory ABS keeps working exactly as designed.
Burgman hub & drive
The Burgman 650 uses its own hub and final-drive arrangement — specified per model and year, exactly like any motorcycle project.
Match the Construction to the Build
Forged 6061-T6 Aluminum
For Hayabusa and GSX-R builds — the strength a big-power bike needs, at the weight a track bike wants.
About Forged Wheels →
Cast A356.1 Aluminum
For Burgman 650 dealer volume programs: consistent batches at the best unit economics. A new design needs a mold — allow about 2 months for mold development and sample approval.
About Cast Wheels →Both constructions support custom finishes and engraved logos — from one set to a private-label dealer program.
How Fitment Is Guaranteed
One show-bike set or a dealer program, the process is identical:
1. Send your model and year plus target sizes, tires and finish direction. 2. 3D drawing — every interface engineered for your bike and shown for your sign-off. 3. Production to the approved drawing — typically 25–30 days after approval. 4. Inspection — finished wheels are checked against the approved drawing and photographed for your approval before release. 5. Export packing and customs — export clearance in China and import clearance in your country handled for you. 6. Tracked shipping to your destination.
The risk sits with the process, not with you
Nothing is produced until you approve the 3D drawing. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty, single sets are welcome before volume, and an NDA is available for program designs. Payment by T/T; PayPal accepted on sample orders (handling fee applies). See documented customer orders.
Suzuki Wheels — Frequently Asked Questions
Which Suzuki models can you build wheels for?
We build for the GSX1300R Hayabusa second generation (2008–2020) and third generation (2021 on), the GSX-R1000R (2017 on), the GSX-R750 and the Burgman 650. Standard front and rear sizes for each are listed on this page, and fitment for your exact model and year is confirmed on a 3D drawing you approve before production.
Do you build wheels for the Suzuki Burgman 650?
Yes. We build the Burgman 650 at 17×3.5 front and 17×4.5 rear. The scooter's own hub and final-drive interfaces are specified for your model and year and confirmed on the 3D drawing — for a single custom set or a dealer volume program.
Which wheel construction suits my Suzuki?
Follow the build. Forged 6061-T6 aluminum is the pick for Hayabusa and GSX-R work, where strength and rotating mass both matter. For Burgman 650 dealer volume programs, cast A356.1 offers the best batch economics; a new cast design needs a mold, so allow about 2 months for mold development and sample approval.
Will custom wheels work with my Suzuki's cush drive and ABS?
Yes. The rear hub is specified around your model's cush drive and sprocket carrier, and ABS sensor ring provision is built into the wheel specification — both confirmed on the 3D drawing you approve before production.
What is the minimum order, lead time and warranty?
One set is the minimum, and dealer volume is supported. Production typically takes 25–30 days after you approve the final 3D drawing, confirmed per project; quotes are sent within 48 working hours once your details are complete. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty; damage from accidents, improper installation, misuse or modification is excluded. If your market requires certification such as JWL or DOT, state it in your quote request and we will confirm what is available for your project.
Spec a Wheelset for Your Suzuki
Send your model and year, wheel type, sizes, finish, quantity and full delivery address. A fitment-confirmed quote comes back within 48 working hours.
FLEXIMOTO · Shapingba District, Chongqing, China · +86 23 6521 0107 · jackie.wei@fleximotoracing.com
Suzuki and all model names are trademarks of their respective owner. FLEXIMOTO is an independent supplier and is not affiliated with or endorsed by Suzuki Motor Corporation; names are used solely for fitment identification.