Custom Yamaha Motorcycle Wheels — From YZF-R1 to TMAX
Two Yamaha worlds, one wheel supplier. On one side, the R-series and MT machines where rotating mass is measured in lap times; on the other, the TMAX, XMAX and NMAX platforms driving one of the strongest scooter custom scenes anywhere. FLEXIMOTO builds custom forged and laced wheelsets for both — fitment engineered per model and confirmed on a 3D drawing before production, with complete inquiries quoted within 48 working hours.
Which Yamaha Models Do We Build Wheels For?
These are the Yamaha platforms we build for most. Find yours below, then send your model and year for a fitment-confirmed quote.
| Model Family | Models | Typical Build Direction | Suggested Construction |
|---|---|---|---|
| Supersport R-Series | YZF-R1 / R1M, YZF-R6, R7, R3 | Track and performance builds chasing rotating mass | Forged |
| MT Hyper Naked | MT-10, MT-09, MT-07 | Streetfighter and stunt-scene builds | Forged |
| Sport Touring | Tracer 9, Tracer 7 | Fast-road setups | Forged |
| Adventure | Ténéré 700 | Rally-bred spoked setups that take the hits | Laced |
| Sport Scooter | TMAX 560, XMAX 300, NMAX 155 | Premium scooter customs and dealer programs | Forged, or cast at volume |
Model or year not listed? Send it with photos of your current wheels — we'll confirm whether reliable fitment data is available before quoting.
What Gets Confirmed on a Yamaha Fitment?
Six items are engineered and locked at the 3D drawing stage for your exact model:
Axle & hub interface
Axle diameters, bearing seats and hub geometry specified per model and year — an R1 and an NMAX share nothing but the tuning forks.
Cush drive & sprocket carrier
Chain-driven Yamahas get the rear hub built around the model's cush drive and sprocket carrier, preserving driveline damping as designed.
Rotor mounting
Bolt pattern and offset matched to your calipers — dual-disc R-series fronts included.
ABS sensor provision
Sensor ring accommodation built into the spec so ABS and traction systems keep reading correctly.
Ténéré tube vs tubeless
Traditional laced Ténéré builds run tubes; tubeless requirements are assessed per project before quoting.
TMAX & scooter interfaces
TMAX, XMAX and NMAX use their own hub and final-drive arrangements — specified per model, exactly like any motorcycle project.
Yamaha Wheelsets Already on the Road
More delivered work across brands: documented customer orders.
Match the Construction to the Build
Forged 6061-T6 Aluminum
For R-series, MT and premium TMAX builds — the best strength-to-weight in the range, with custom spoke designs and deep finishes.
About Forged Wheels →
Laced — 7-Series Rim + Stainless Spokes
The working construction for Ténéré 700 adventure setups: impact-resilient, serviceable, custom lacing patterns.
About Laced Wheels →Running a scooter volume program? Cast A356.1 wheels deliver batch consistency at the best unit economics (a new design needs a mold — allow about 2 months for mold development and sample approval) — full private-label lines via the OEM & ODM Service.
How Fitment Is Guaranteed
One R1 track set or an NMAX dealer program — the process is identical:
1. Send your model and year plus target sizes, tires and finish direction. 2. 3D drawing — every interface engineered for your bike and shown for your sign-off. 3. Production to the approved drawing — typically 25–30 days after approval. 4. Inspection — finished wheels are checked against the approved drawing and photographed for your approval before release. 5. Export packing and customs — export clearance in China and import clearance in your country handled for you. 6. Tracked shipping to your destination.
The risk sits with the process, not with you
Nothing is produced until you approve the 3D drawing. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty, single sets are welcome before volume, and an NDA is available for program designs. Payment by T/T; PayPal accepted on sample orders (handling fee applies). See documented customer orders.
Yamaha Wheels — Frequently Asked Questions
Which Yamaha models can you build wheels for?
We build for the most popular Yamaha platforms — YZF-R1, R6, R7 and R3 supersports; MT-10, MT-09 and MT-07 naked bikes; Tracer sport-tourers; the Ténéré 700; and the TMAX 560, XMAX 300 and NMAX 155 scooter family. Fitment for your exact model and year is confirmed on a 3D drawing you approve before production.
Should I choose forged or laced wheels for a Yamaha?
Match the construction to the platform. Forged 6061-T6 aluminum is the pick for R-series, MT and premium TMAX builds where rotating mass matters. Laced wheels with 7-series rims and stainless spokes are the working choice for Ténéré 700 adventure use. Scooter volume programs can also run cast A356.1 for the best batch economics.
Do you build wheels for the TMAX, XMAX and NMAX?
Yes — from one-off TMAX customs to NMAX dealer volume programs. Send the model and year, and the hub and drive interfaces are specified and confirmed per project on a 3D drawing.
Will custom wheels work with my Yamaha's cush drive and ABS?
Yes. On chain-driven models the rear hub is specified around the cush drive and sprocket carrier, and ABS sensor ring provision is built into the wheel specification — both confirmed on the 3D drawing you approve before production.
What is the minimum order, lead time and warranty?
One set is the minimum, and dealer volume is supported. Production typically takes 25–30 days after you approve the final 3D drawing, confirmed per project; quotes are sent within 48 working hours once your details are complete. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty; damage from accidents, improper installation, misuse or modification is excluded. If your market requires certification such as JWL or DOT, state it in your quote request and we will confirm what is available for your project.
Spec a Wheelset for Your Yamaha
Send your model and year, wheel type, sizes, finish, quantity and destination. A fitment-confirmed quote comes back within 48 working hours.
FLEXIMOTO · Shapingba District, Chongqing, China · +86 23 6521 0107 · jackie.wei@fleximotoracing.com
Yamaha and all model names are trademarks of their respective owner. FLEXIMOTO is an independent supplier and is not affiliated with or endorsed by Yamaha Motor Co., Ltd.; names are used solely for fitment identification.