Custom MV Agusta Motorcycle Wheels — Brutale, Dragster & F3
MV Agusta builds some of the most sculpted motorcycles on the road, and the single-sided swingarm puts the rear wheel on full display. FLEXIMOTO builds custom forged wheelsets for the Brutale, Dragster, F3, Superveloce and Turismo Veloce — pick the design and finish you like, and we match the sizes and hub interfaces to your model on a 3D drawing before production. Complete inquiries are quoted within 48 working hours.
Which MV Agusta Models Do We Build Wheels For?
These are the MV Agusta platforms we build for. Every design we show can be made for any of them — the rear width follows your model.
| Model Family | Models | Reference Sizes (Front / Rear) | Typical Build Direction | Suggested Construction |
|---|---|---|---|---|
| Brutale Naked | Brutale 800 | 17 × 3.5 / 17 × 5.5 | Street and streetfighter builds | Forged |
| Brutale Naked | Brutale 1000 | 17 × 3.5 / 17 × 6.0 | Hyper-naked builds chasing rotating mass | Forged |
| Dragster | Dragster 800 | 17 × 3.5 / 17 × 6.0 | Show builds where the rear wheel is the centrepiece | Forged |
| Supersport | F3 800 | 17 × 3.5 / 17 × 5.5 | Track and fast-road builds | Forged |
| Neo-Retro | Superveloce 800 | 17 × 3.5 / 17 × 5.5 | Design-led builds with a classic finish | Forged |
| Crossover Touring | Turismo Veloce 800 | 17 × 3.5 / 17 × 5.5 | Fast-road and touring setups | Forged |
Model or year not listed? Send it with photos of your current wheels — we'll confirm whether reliable fitment data is available before quoting.
What Gets Confirmed on an MV Agusta Fitment?
Six items are engineered and locked at the 3D drawing stage for your exact model:
Single-sided rear hub
The rear hub is engineered to your model's single-sided swingarm interface, so the wheel mounts exactly like the original.
Cush drive & sprocket carrier
The rear hub is built around the model's cush drive and sprocket carrier, preserving driveline damping as designed.
Front axle & hub interface
Axle diameter, bearing seats and hub geometry specified per model and year.
Rotor mounting
Bolt pattern and offset matched to your calipers — dual-disc fronts included.
ABS sensor provision
Sensor ring accommodation built into the spec so ABS and traction systems keep reading correctly.
Rear width by model
5.5-inch rear for the Brutale 800, F3, Superveloce and Turismo Veloce; 6.0-inch for the Brutale 1000 and Dragster 800.
MV Agusta Wheelsets Already on the Road
Each design below can be built for any model in the table above, and each set carries a quote reference. Send it with your model and year to order the same design and finish.
Want to see every MV Agusta build?
Our MV Agusta gallery shows more delivered wheelsets than fit on this page — real workshop photos grouped by design and finish, each with a quote reference. Ask for the PDF and we'll send it with your quote.
Prefer email? Ask through the quote form and mention "MV Agusta gallery" in your message.
More delivered work across brands: documented customer orders.
Match the Construction to the Build
Forged 6061-T6 Aluminum
For Brutale, Dragster and F3 builds — the best strength-to-weight in the range, with custom spoke designs and deep finishes.
About Forged Wheels →Dealer & private-label programs
Supplying MV Agusta wheels to your customers? Single sets are welcome before volume, and the same 3D drawing process applies to every order.
Full private-label wheel lines run through our OEM & ODM Service, with an NDA available for program designs.
How Fitment Is Guaranteed
One Brutale set or a dealer program — the process is identical:
1. Send your model and year plus target sizes, tires and finish direction — or a quote reference from our gallery. 2. 3D drawing — every interface engineered for your bike and shown for your sign-off. 3. Production to the approved drawing — typically 25–30 days after approval. 4. Inspection — finished wheels are checked against the approved drawing and photographed for your approval before release. 5. Export packing and customs — export clearance in China and import clearance in your country handled for you. 6. Tracked shipping to your destination.
The risk sits with the process, not with you
Nothing is produced until you approve the 3D drawing. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty, single sets are welcome before volume, and an NDA is available for program designs. Payment by T/T; PayPal accepted on sample orders (handling fee applies). See documented customer orders.
MV Agusta Wheels — Frequently Asked Questions
Which MV Agusta models can you build wheels for?
We build for the most popular MV Agusta platforms — the Brutale 800 and Brutale 1000, the Dragster 800, the F3 800, the Superveloce 800 and the Turismo Veloce 800. Fitment for your exact model and year is confirmed on a 3D drawing you approve before production.
Which rear width does my MV Agusta need?
Our reference sizes are 17 × 3.5 front on every model. The rear is 17 × 5.5 for the Brutale 800, F3 800, Superveloce 800 and Turismo Veloce 800, and 17 × 6.0 for the Brutale 1000 and Dragster 800. Sizes are confirmed for your bike on the 3D drawing.
Do custom wheels fit the single-sided swingarm?
Yes. The rear hub is engineered to your model's single-sided swingarm interface, cush drive and sprocket carrier, and ABS sensor ring provision is built into the wheel specification — all confirmed on the 3D drawing you approve before production.
Can I order a design from your MV Agusta gallery?
Yes. Every design in our MV Agusta gallery can be built for any of the models above, and each wheel set carries a quote reference, for example MV-ALL-B1. Choose the design and finish, send the reference with your model and year, and we match the sizes to your bike. Ask for the gallery PDF on WhatsApp or through the quote form.
What is the minimum order, lead time and warranty?
One set is the minimum, and dealer volume is supported. Production typically takes 25–30 days after you approve the final 3D drawing, confirmed per project; quotes are sent within 48 working hours once your details are complete. Every custom wheel carries a 3-year structural warranty and a 1-year finish warranty; damage from accidents, improper installation, misuse or modification is excluded. If your market requires certification such as JWL or DOT, state it in your quote request and we will confirm what is available for your project.
Spec a Wheelset for Your MV Agusta
Send your model and year, wheel type, sizes, finish, quantity and destination — or a quote reference from our gallery. A fitment-confirmed quote comes back within 48 working hours.
FLEXIMOTO · Shapingba District, Chongqing, China · +86 23 6521 0107 · jackie.wei@fleximotoracing.com
MV Agusta and all model names are trademarks of their respective owner. FLEXIMOTO is an independent supplier and is not affiliated with or endorsed by MV Agusta Motor S.p.A.; names are used solely for fitment identification.